SELF BUILDING WITH “THE SIPCRETE SYSTEM“ By Boris Defranceschi – Cyprus”
SIPCRETE BUILDING SYSTEM
He had no previous building experience!
He Made Panels, Erected Them, and Sprayed The Concrete,
Boris is now the Sipcrete Licensee in Cyprus Panels are light weight, so no heavy lifting equipment is required.
Panels are light weight, so no heavy lifting equipment is required
The “Sipcrete” Thermocore panels are attached to the slab foundation on rebar or channel section mesh strips that are cast into the foundations or fixed with Hilti nails so each panel is continuously fixed to the base/slab.
They are so simple to assemble, only unskilled labour is required
To attach panels to each other a special connection and aperture closure system is used to ensure thermal bridging does not occur at window and door openings. To connect the mesh simply joint and secure it with wire ties or a pneumatic fastening tool.
Water penetration across the wall or roof is impossible
Wiring conduit and plumbing are clipped to the steel mesh.The Thermocore Panels are easily cut to prepare apertures for windows and doors.
Installation of electrics and plumbing is easy simply clip conduits to mesh
The Thermocore walls/roofs are then spray coated both inside and outside the building with 40-50 mm of
The “Sipcrete” Concrete Finish.
Coloured and textured finishes are easily applied
Concrete facing easily applied by hand, low cost, sprayer or high out put equipment